Y. Fong Electrical Co., Pte Ltd

10, Jalan Besar #B1-42 Sim Lim Tower, Singapore 208787Tel: +65 6296 7473 / +65 6297 6993Fax: +65 6296 5151

Fluke 770 Series MiliAmp Clamp Meter/ Simulator

Fluke 770 Series MiliAmp Clamp Meter/ Simulator

Model: Fluke 772/773

Manufactured By: Fluke

Catalogue: 770series.pdf

Description: The 772 and 773 expand upon the capabilities of the popular 771 mA Clamp Meter. Now all you have to do is decide which model will help you save the most time. The Fluke 771, 772 and 773 features:

Best in class 0.2 % accuracy
0.01 mA resolution and sensitivity
Measure 4 to 20 mA signals without ”breaking the loop”
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements

Fluke 772 and 773 add:
Measure 4 to 20 mA signals with in-circuit measurement
Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
Source 4 to 20 mA signals for testing control system I/O or I/Ps
mA output linear ramp or 25% step output
Automatically change the 4 to 20 mA output for remote testing

Fluke 773 Only Features:
DC voltage measurement to verify 24V power supplies or voltage I/O signals
Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
Enables milliamp signal logging to a separate logging device without breaking the loop
Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
Voltage output linear ramp or 25% step output
Automatically change the voltage output for remote testing